PDA

View Full Version : 97 TC Factory Phone Voice and Memory Options


Richard J. Parker
December 26th, 2001, 11:08 AM
Slidell Sleeper
posted December 25, 2001 01:28 PM
---------------------------------------------Does anyone know where I can get a copy of the Lincoln cellular phone guide for a 98 Mark VIII?
I will pay a reasonable fee, or a copy would be fine!
Finally got my cellphone in the car connected after a year, got it to work thru the car, but want to program it to voice recognition etc and need the book!
Thanks so much,
Karl Jacobs
--------------------------------------------------------------------------------
Posts: 3 | From: Slidell, La | Registered: Jan 2001 | IP: Logged

Richard J. Parker
posted December 26, 2001 12:04 PM
---------------------------------------------

Call Ford Audio at 1-800-336-3996 x240 Rudy. The book cost me $8.
If the phone is like my 97 TC do the following:

Set up Voice Dialing:
1. Enter Phone Number (eg. 713 816 5555)

2. Press STO *

3. System says "Directory Name Please"

4. Under quiet conditions with the car running speak the name to be stored like "Carol". This is called training the phone.

5. The System asks for a confirming training by saying "Again Please" or "Repeat Please"

6. The System will say "Please Wait" and then "Done Training" followed by a short playback of the name (if enabled).

7. To use press the handsfree button by the rearview mirror and the system will ask "Name Please". Say the name and the system should say "Thank You". You won't hear dialing.

Error Messages:
a. "Directory Full" if 20 locations are in use for voice dialing.

b. "Sorry, Too Noisy to Train" if too noisy (usually when on the highway).

c. "Louder" Speak louder

Options

I. Step 2 can be STO xx (with xx the desired memory location)

II. End the handsfree call with the same phone button near the mirror.

III. Voice Memory Scolling lets you hear all the recorded names. FCN 099 STO 0 for the first location. Use the left and right arrows to continue through the locations. Return to normal with the END key.

IV. Normal number storage:
STO xx END (with xx the two digit location. Disregard the "Directory Name Please" after the xx). Up to 16 digit storage in 30 locations (20 with voice).

V. Auto Store:
713 816 5555 STO * will store into next available memory location.

VI. Recall Memory Location:
RCL xx SEND
or
xx SEND (number not on display)

VII. Delete Numbers and Voice:
Bring up memory location, press and hold CLR, press STO xx.

VIII. Recall Last number called:
RCL