PDA

View Full Version : '86 Continental Interior Lamp Relay


Danvers88
January 27th, 2007, 02:24 PM
I replaced the Relay today, and fuse 13 still blows when I put on the park/headlights.
I've unplugged almost everything fuse 13 supplies and put back one at a time, and each time the fuse opens.
Scratching my head on this one.
I'm thinking a wire is pinched someplace but don't know where that would be.
Any suggestions to get my dash illumination lamps ON let me know, thanks. BOB

pro-five-oh
April 10th, 2007, 05:31 PM
Bump! This thread was posted in the wrong forum.

Nick
April 10th, 2007, 08:30 PM
What's on the circuit again?

nicholas77586
April 11th, 2007, 10:01 AM
put your ohm meter on that wire and test to ground to see if there is a fualt. thats how i fixed my door locks, there was a corroded wire and it was being grounded out on the floor board.