Power locks don't work. Diagnostic help??

[ProjectVII]

I have come to you for yet another problem. My power locks have suddenly stopped working. At first, when I hit the Lock/Unlock buttons, the keyless entry module would click...obviously getting signal from the switches, but not activating the actuators. Yesterday, they worked altogether. Today, they are 100% DEAD. The L/UNL switches have power, so do the connections at the Keyless Entry Module. How do I test the Keyless entry module?
I'm lost from there, on...as to what to test. HELP?
BTW an update on ProjectVII's progress is coming soon.

[2manymarks]

I have come to you for yet another problem. My power locks have suddenly stopped working. At first, when I hit the Lock/Unlock buttons, the keyless entry module would click...obviously getting signal from the switches, but not activating the actuators. Yesterday, they worked altogether. Today, they are 100% DEAD. The L/UNL switches have power, so do the connections at the Keyless Entry Module. How do I test the Keyless entry module?
I'm lost from there, on...as to what to test. HELP?
BTW an update on ProjectVII's progress is coming soon.

Will the trunk "unlock" function work?

[ProjectVII]

I'm going to check tonight.

[Magic Al]

Check fuse #5 & #8 for the keyless entry module. Do the seats, trunk pull down, and fuel door release work? They're on the same in line Circuit Breaker @ the starter solonoid as the locks.

[ProjectVII]

OK!! I finally got a chance to look at the keyless entry system. Driver's and passenger's door unlocks/locks with the code put in, and the trunk works...Are the switches on a separate circuit? they must be.

[Tony T]

If the locks work on all automatic lock/unlock modes, then the problem most likely lies with the manual switches or continuity between switch/s and ground (black wire) or between switch/s and module (pk/lg unlock) (pk/y lock).

[ProjectVII]

Thanks Everyone for your help!!!! I will check that continuity, Tony. I do appreciate it.