Quick injector question

[Drake_tr7]

Would the injectors out of a Blass be 19lb ? And anybody have a Ford pn for a 195 thermostat ?

[Fordace]

http://catalog.oehq.com/item.wws?sku=RT-1139&itempk=383750&mfr=MOTORCRAFT&weight=5&cookieID=2HJ162QCI2HJ162QCH&clientid=oehq

:confused: for an 88-92 mark

[Drake_tr7]

Thanks Fordace. Now do all the 5 litres use the 19s ?

[Fordace]

My 88 Bill Blass used the same injectors at my 90 LSC, Not sure if they're all 19lbs though....more than likely though...

[montegoman351]

Grey top= 14lb/hr
Yellow top= 19lb/hr

[pro-five-oh]

Thanks Fordace. Now do all the 5 litres use the 19s ?

Only if the SEFI (not CFI) intake says 5.0HO. Otherwise they are 15lb/hr.

[Hizhonor]

The "schoolbus yellow" tops are 19# Injectors. These are what you need.

[Drake_tr7]

Thanks you guys, Bryan just tore his motor down to put the explorer intake on and discovered his injector harness is toast and the injector tops too. He has a set of the grey ones from a Blass, but now we know they're NFG fo his HO so it's time for some $$ ;)

[gadget73]

88+ all had HO engines with 19" injectors. 86-87 BB used a non-HO motor with grey top 14# injectors.

4.6 modular motors have 19# injectors, and those rails are dead simple to remove if you're boneyard hunting for injectors.

[PETE]

hey you might try www.lindertech.com.,they sell rebuilt inj and a good price.send them yours,and get a rebuilt set.have them in my 88 f150 still going strong. might be woth looking into i sent mine on sat had a set on tues. they are in indy.